Many issues related to the design of compression springs should be considered, as these relate directly to the spring's performance. Compression spring manufacturing tolerance requirements, squareness of ends, deflection and the slenderness ratio often are overlooked in the design process. Newcomb's sales and engineering staff will gladly review your compression spring specifications. We can offer design assistance and recommend the best options to control costs and make sure the spring functions to fit your needs.
Compression spring ends often are ground to increase operational life and to allow the spring to sit squarely on the load-bearing surface. Grinding of compression springs also increases the number of active coils and the wire diameter available in a given volume of space, which can result in higher loads or lower stresses. As a modern compression springs manufacturer, our facilities operate with a wide variety of equipment - from hand-operated grinding tools to automatic, high-speed vertical spindle disc grinders.
While we have listed some of the most common sizes, materials and manufacturing specifications, Newcomb Spring provides completely customized production on all compression springs.
If you don't see the compression spring you need listed here, don't hesitate to contact us. Whatever your needs - Newcomb Kan-Do It!
|Spring Characteristic||Open||Open & Ground||Closed||Closed & Ground|
|Pitch (p)||L - d
|L - 3d
|L - 2d
|Solid Height (H)||d(N1 + 1)||d x N1||d(N1 + 1)||d x N1|
|Total Coils (N1)||na||na + 1||na + 2||na + 2|
|Free Length (L)||(p x na) + d||p x na||(p x na) + 3d||(p x na) + 2d|
|d = Diameter of Round Wire (in. or mm.)
L = Free Length N1 = Number of Coils
|Na = Number of Active Coils
p = Pitch
Compression Spring with Closed Ends, Not Ground, Left-Hand Helix
Compression Spring with Closed & Ground Ends, Right-Hand Helix
Compression Spring with Open Ends, Not Ground, Right-Hand Helix
Compression Spring with Open & Ground Ends, Left-Hand Helix
As a custom compression spring manufacturer, Newcomb Spring can produce a wide variety of compression spring shapes, sizes and designs. Using material sizes from .007 to .625 inches in spring wire diameter, and up to 2.0 inches bar stock, all Newcomb compression springs are precision manufactured to meet even the strictest order requirements. With over a century of spring design and manufacturing experience we can provide design assistance on your compression spring order, helping lower production costs and review your part's fit and function.
Below are just a small selection of the compression spring shapes we have produced, including:
A NETWORK OF NEWCOMB SPRING FACILITIES • HEADQUARTERS: 5408 PANOLA INDUSTRIAL BLVD • DECATUR, GA 30035 • 770-981-2803 • KANDO@NEWCOMBSPRING.COM • © 2017 NEWCOMB SPRING CORP.